Konfigurasi VLAN di Switch dan Router Cisco

Pada lab kali ini, saya akan mencoba melakukan konfigurasi vlan diswitch dan kemudian konfigurasi subinterface dirouter agar pc client dapat berkomunikasi keluar network.

1. Konfigurasi Switch

• Sw-A & Sw-C

# interface FastEthernet0/1–2
# switchport access vlan 10
# switchport mode access

# interface GigabitEthernet0/1
# switchport trunk native vlan 99
# switchport mode trunk

• Sw-B & Sw-D

# interface FastEthernet0/1–2
# switchport access vlan 20
# switchport mode access

# interface GigabitEthernet0/1
# switchport trunk native vlan 99
# switchport mode trunk

2. Konfigurasi Router

• Router A

# interface GigabitEthernet6/0
# no shutdown
# exit

# interface GigabitEthernet6/0.10
# encapsulation dot1Q 10
# ip address 192.168.1.254 255.255.255.0

# interface GigabitEthernet7/0
# no shutdown
# exit

# interface GigabitEthernet7/0.20
# encapsulation dot1Q 20
# ip address 192.168.2.254 255.255.255.0

# interface GigabitEthernet8/0
# ip address 172.16.1.1 255.255.255.0
# no shutdown

# ip route 192.168.3.0 255.255.255.0 172.16.1.2
# ip route 192.168.4.0 255.255.255.0 172.16.1.2

• Router B

# interface GigabitEthernet6/0
# no shutdown
# exit

# interface GigabitEthernet6/0.10
# encapsulation dot1Q 10
# ip address 192.168.3.254 255.255.255.0

# interface GigabitEthernet7/0
# no shutdown
# exit

# interface GigabitEthernet7/0.20
# encapsulation dot1Q 20
# ip address 192.168.4.254 255.255.255.0

# interface GigabitEthernet8/0
# ip address 172.16.1.2 255.255.255.0
# no shutdown

# ip route 192.168.1.0 255.255.255.0 172.16.1.1
# ip route 192.168.2.0 255.255.255.0 172.16.1.1

3. Selanjutnya kofigurasikan IP address disetiap PC sesuai dengan topologi yang telah dibuat diatas,

4. Finally setelah semua perangkat dikonfigurasi, lakukan verifikasi dengan melakukan ping dari PC ke router, dari PC ke PC Vlan sama, PC ke PC berbeda Vlan.

• PC ke Router

• PC ke PC Vlan sama

• PC ke PC berbeda Vlan

Thanks for reading :)